Toner cartridges are integral (or integrated) and separate two. The integrated cartridge is designed to contain toner cartridges and drums on the same device. When the toner is exhausted or the drum is damaged, the entire cartridge is scrapped. This type of cartridge is mainly HP (HP) and Canon (Canon) models, this unique design to increase the user's printing costs, and the great harm to environmental pollution, but brought to the manufacturer Lucrative profits. Separate Dell 593-BBKD Toner and drums and other drums in different devices, and the photosensitive drum general life is very long, generally can print to reach 20,000 life. Just put on the Dell 1260 Compatible Toner is consumed on the line, so the user's printing costs are greatly reduced. Because it has a great relationship with the life of the photosensitive material in the toner cartridge. If the life of the drum printer is not as good as the life of the integrated printer cartridge, it is impossible to save the cost of printing a single page, so the cost of printing a single page And drum has a great relationship.

Find printer toner cartridges for nearly any model of laser printers on the market today at V4ink. They offer a complete line of drums and toner cartridges printing supplies at a fraction of the cost of branded products.

The basic structure of the drum is composed of aluminum tube and photosensitive material. According to the different materials, the basic can be divided into three types: OPC drum (organic light guide material), toner cartridge (Se selenium) and ceramic drum (a-si ceramic). In life, OPC drum life is generally about 3000 pages, Se drum life is about 9000 pages, a-si drum life is 90000 pages. While the general ordinary cartridge (OPC) only the first three. The first layer is aluminum, the second layer is the insulation layer, the third layer is the photosensitive layer. Long life drum surface is composed of four - five layers of material, ceramic photosensitive material long - life cartridge can even print more than 100,000 pages. Its fourth layer is the first protective layer, the fifth layer is the second protective layer, the fourth, fifth layer is used to protect the photosensitive layer. Which is the parameters of the manufacturers of the test evaluation, of course, these prices are very different. more...

Posted by: v4toner at 02:35 AM | No Comments | Add Comment
Post contains 434 words, total size 3 kb.

The combination of toner and paper is in the Samsung MLT-D118L Toner permeates the fibers of the paper and it firmly bonded to the paper fibers. This is the ability of the paper to absorb the molten toner, which interacts with the pores of the paper and the penetration of the molten toner into the paper, and the size and distribution of the paper pores determines the density of the paper. Generally speaking, "the density of the paper" refers to the density and thickness of the paper fibers, and the size of the capillary, for the print quality, the following two points:

(1) If the paper fiber distribution is too loose, or paper fiber is too large, the capillary is relatively large, the paper density is small, a large number of molten toner into the paper inside the pores, replacing the air part of the paper hole, causing paper The scattering capacity of the paper is reduced, the light scattering ability of the paper is reduced, the transparency is increased, and the occurrence of the permeation phenomenon can easily occur. Once the offset is printed, the detail expression is deteriorated and the image resolution is reduced, and the paper It is easy to produce hair, dust, pollution of the cartridge, resulting in print defects, but also dirty the printer, especially the optical part of the pollution, it is easy to produce printed matter at the end of ash;
(2) paper density is too large. Toner can not quickly penetrate into the paper into the pores, this is not conducive to the increase in print speed, will also cause fixation is not strong, that imprint has been friction, toner particles will peel off. You need to choose the appropriate size of the paper in order to better protect the quality of printed materials.

For a printer, you need to know so many knowledges to let the printer live longer. Hope these will help you a lot.If need other information, come to V4INK, it also have Samsung CLT-404S Toner.

In addition, the different paper on the toner color rendering ability is different, even if the same printer, the same toner, print the same content, if printed on different paper, its manifestations are not the same, especially for color In terms of printing, some show bright colors, but some will appear color cast and other phenomena, which is "paper whiteness", "paper whiteness" refers to the paper by the light after the full reflection of the ability.

Posted by: v4toner at 08:13 AM | No Comments | Add Comment
Post contains 422 words, total size 3 kb.